RF Design Magazine
About RF Design divider For Advertisers divider Contact Us divider Subscribe to RF Design divider HOME


RF Front-End Resources
RF front-end modules enable... - from wirelessnetdesignline.com


RF Front-End 
Sep 23, 2008 

Simplifying RF front-end design in multiband handsets 
Feb 1, 2008  By Duncan Pilgrim
Ruthless competition in the handset market continues to drive manufacturers to search for new opportunities to drive down cost, printed circuit board...

Spectral-mask shaping for a Class 1 Gen 2 PR-ASK RFID I/Q modulator 
Feb 1, 2008  By Doug Stuetzle
An integrated I/Q modulator such as the LT5568-2 can generate the 900 MHz transmit signal for a Class 1 Gen 2 UHF RFID reader. While there are less expensive...

Low additive noise frequency tripler 
May 1, 2007  By Bogdan Sadowski
Design of a frequency tripler is presented and its noise degradation, due to the presence of additive noise of the multiplier, is measured and compared to theoretical limits....

Miniaturized HF direction-finding antenna system is portable 
May 1, 2007  By Joseph R. Jahoda
By incorporating advanced techniques and an effi cient loop antenna confi guration, a direction-fi nding antenna array has been achieved, which is small and portable for 2 MHz to 30 MHz applications....

CAD implementation of DR-based oscillator using non-linear analysis 
Mar 1, 2007  By Kamaljeet Singh and Surendra Pal
The concept of modeling along with the simple design equations, characterization and implementation of the dielectric resonator puck model in oscillator simulation, are presented....

Removing the interstage transmit SAW in WCDMA 
Feb 1, 2007  By Tajinder Manku
This article analyzes the trade-offs required for removing the Tx SAW from the transceiver and duplexer sections of the handset....

Upconverting WiMAX mixer provides high IP3 
Nov 1, 2006  By Radhakrishna Setty
While many new RF capabilities are enabled by sophisticated RFICs, simple structures, such as a double-balanced quad diode mixer, can effectively perform the same signal-processing functions while also exhibiting superior electrical performance and robustness....

Antenna manufacturer establishes presence in India 
Oct 1, 2006 
More and more manufacturers from the United States are setting up design and manufacturing centers in India. The latest to join this trend is antenna designer and manufacturer Laird Technologies. To further strengthen its proximity and support capabilities to key customers in the south Asian market, Laird has announced plans to open a manufacturing facility in Chennai, India....

Optimizing mobile handset performance 
Sep 1, 2006  By Greg Mendolia
Making RF radios in mobile devices "tunable" is not a new development. But, tunable RF technology is seen as too lossy, too large, too expensive or having poor linearity....

How to best marry time-domain system-level verification with frequency-domain RF circuit simulations 
Sep 1, 2006  By Ashok Bindra, Editorial Director
This article is a discussion based on a panel presented at the IEEE MTT-S International Microwave Symposium in San Francisco, Calif. RF Design posed six questions to six panelists on the topic of system-level verification of RF circuits and compiled their responses. The panel discusses the pros and cons of various methods that enable system-level verification of RF circuits....

Designing and simulating THz wire waveguides using FEM modeling 
Aug 1, 2006  By Jason A. Deibel and Daniel M. Mittleman
This article outlines the requirments for effective THz waveguides, explains a solution to this engineering dilemma, and shows how finite element method modeling is being used to develop an effective and efficient THz waveguide system....

Reducing current consumption and cost with 902-928 MHz spread spectrum ASK modulation 
Jun 1, 2006  By Staale Pettersen
Today's wireless ICs require only a handful of external components and have become a minor percentage of the total solution cost. Looking into the future...

Ceramic antenna offers low dielectric losses, cuts cost 
May 1, 2006 
Laird Technologies ceramic antennas for handset and wireless data devices are the RF Design Product of the Month for May 2006....

Accurately measuring phase and delay error in direct I/Q modulators 
Apr 1, 2006  By Peter Stroet
Direct-conversion I/Q modulation is an attractive solution for advanced RF transmitters, enabling complex modulation at lower cost. A direct I/Q modulator...

1 | 2 | 3 | 4 | Next
Advertisement
Featured Resources
Add This RSS Feed
• Add this RSS feed
• Add this RSS feed to My Yahoo!
• Add this RSS feed to Newsgator
• Add this RSS feed to Bloglines
 
 What is RSS?

Source ESB Part Search
Search inventories from hundreds of distributors quickly and easily!

Newsletters
RF DESIGN BULLETIN
•  Current Issue
• Subscribe Now
EMERGING WIRELESS
TECHNOLOGY
• Current Issue
• Subscribe Now
DEFENSE ELECTRONICS
• Current Issue
• Subscribe Now

Advertisement
Resources
Related Sites
June Defense
 
Back to Top


Contact Us  For Advertisers  For Search Partners  Privacy Policy  Subscribe
© 2008 Penton Media, Inc.

popular searches: zigbee | quadrature modulation | OFDM | WiMAX